Triflex Bridge Deck Primer

Find out more

Triflex Bridge Deck Primer

Triflex Bridge Deck Primer

Triflex Bridge Deck Primer is used on concrete bridge decks according to ZTV-ING, Part 6, Section 1 as a primer and sealant based on PMMA resin. It serves as a certified, fast-reacting alternative to conventional epoxy resins.

Product information
Triflex Bridge Deck Primer
PI-Triflex-Bridge-Deck-Primer-Product-information-0c7212.pdf (742.75 KB)
742.75 KB, PDF
Other brochures
Triflex Bridge Deck
Broshure-Finishing-system-for-bridges-Triflex-Bridge-Deck-efd336.pdf (2.54 MB)
2.54 MB, PDF

  Your benefits at a glance:

  • Spray application using Triflex SAM  
  • Certified according to TL/TP BEL-EP (1999) Test Report No. 190E-00031OR01-PB01 by KIWA Polymer Institute
  • Tested with Börner OK 50 membrane
  • Tested Vedapont® BE membrane
  • Tested with IKO-Axter B3A SA-P
  • Rapidly reactive even at temperatures down to 0 °C
  • Suitable for use in high relative humidity
  • Heat-resistant for torch-applied membranes
  • Ready for bitumen torch-applied membranes after 50 minutes
  • Economical, especially for small to medium-sized projects by hand application

Comparison of EP resin & PMMA

  EP resin PMMA
Substrate preparation x x
1st Layer x x
2nd Layer Day 2 Day 1
Installation of bituminous membrane Day 3 Day 1
Completion of waterproofing Day 3 Day 1

Renovation Example

Sanierungsbeispiel Triflex Bridge Deck Primer

Triflex Bridge Deck SC

Triflex Bridge Deck SC is used as a certified scratch coat in the Bridge Deck System according to TL/TP-BEL – EP. It is a 2-component, unpigmented, pre-mixed scratch coat based on polymethyl methacrylate (PMMA) resin and can be used for texture depths up to 5 mm.

Product information
Triflex Bridge Deck SC
Triflex-Bridge-Deck-SC-Product-information-28e904.pdf (700.17 KB)
700.17 KB, PDF

 Your benefits at a glance

  • Fast-curing
  • Solvent-free
  • Rapidly resistant
  • Weather-resistant
  • Preset mixing ratio 1 : 4
  • Removal of partial quantities possible
  • Can still be applied when rel. humidity is high
  • Compatible with standard torch-on bitumen membranes
  • Heat-resistant when laying membrane with an open flame
  • Bitumen welding membrane can be laid after only 50 min.
  • Initial testing as per TL/TP BEL-EP (1999)
  • Test report no. 190E-00031OR01-PB01 of the KIWA Polymer Institute

These references might interest you!

Thumbnail
Refurbishment of an underpass for cyclists and pedestrians under an S-Bahn station with Triflex Asphalt Repro.
Thumbnail
Refurbishment of the ruts of an approach ramp with Triflex Asphalt Repro.
Thumbnail
Stone inlay of a traffic island with Triflex Asphalt Repro.
To the reference page

How can we help you?

We are here for you. Give us a call if you have any questions about our products and system solutions.
+49 571 38780-0
info@triflex.de
All contact information

Other systems from the area of maintenance & operation

Thumbnail
Sealing mortar for rails, manhole frames, gullies and gutters
Thumbnail
Joint sealant
Thumbnail
Sealing of cracks or construction joints (e.g. induction loops) from a width of 5 mm
Thumbnail
Bonding/fixing (e.g. traffic islands) as well as sealing of cracks and construction joints from 10 mm width
Thumbnail
Repair and levelling work on concrete surfaces
Thumbnail
Repair and levelling of asphalt surfaces
Thumbnail
Mortar for filling, bonding and re-profiling concrete surfaces
Thumbnail
Mortar for filling, bonding and re-profiling asphalt surfaces
to the overview
?