Preco Cryl Roller-Applied Plastic 2K

Preco Cryl Roller-Applied Plastic 2K is used as a textured and non-slip coating for surfaces and cycle paths, including those which run alongside the main flow of traffic.

Preco Cryl Rollplastik 2K

Preco Cryl Roller-Applied Plastic 2K is used as a textured and non-slip coating for surfaces and cycle paths, including those which run alongside the main flow of traffic. The completely resilient and non-slip surface cures in less than twenty minutes. It can be applied quickly and easily with a rubber blade or a wool roller. Due to the coarse filling materials contained in the material, it is not necessary to dress the surfaces with anti-skid aggregate.

Preco Cryl Roller-Applied Plastic 2K is suitable for coating cycle paths on bituminous surfaces as well as concrete substrates (with Triflex Than Primer L 1K).

  • Markings for use alongside the flow of traffic
  • Textured, non-slip surfaces
  • Cycle path markings
Preco Cryl Rollplastik 2K

System set-up

  1. Triflex Than Primer L 1K – for sealing the concrete substrate and ensuring substrate adhesion
  2. Preco Cryl Roller-Applied Plastic 2K – continuous surface coating in layer thicknesses of approx. 1.0 to 1.2 mm

Material consumption

Preco Cryl Roller-Applied Plastic 2K, density approx. 1.7 g/cm³


Required volume approx. 2.00 kg/m² with a layer thickness of approx. 1.2 mm.


Calculation formula: Surface width (m) x surface length (m) x volume (kg/m²) = volume required for the surface (kg)

Colours

  • 3009 Oxide red
  • 3013 Tomato red
  • 3020 Traffic red
  • 5017 Traffic blue
  • 6024 Traffic green
  • 7043 Traffic grey B
  • 9005 Black
  • 9010 White