Triflex Line Cold Plastic is used for type I and type II markings as a closed-finish line, profiled or agglomerate marking.
Triflex Line Cold Plastic is a solvent-free, 2-component product with a polymethyl methacrylate (PMMA) resin base. It enables type I and type II markings to be applied in the form of closed-finish line marking as well as agglomerates and profiles. Triflex Line Cold Plastic is particularly suitable for roads with high traffic volumes and high requirements for night visibility.
Triflex Cold Plastic products are also used in industrial buildings and multistorey car parks with high requirements for wear-resistance. The Triflex Line products are suitable for bituminous surfaces as well as concrete substrates (with Triflex Than Primer L 1K). They can be applied by machine using an extruder and screed box technique as well as manually using a screed box, smoothing trowel or spreader.
System build-up
- Triflex Than Primer L 1K – for sealing the concrete substrate and ensuring substrate adhesion.
- Triflex Line Cold Plastic – for closed-textured, agglomerate or profiled markings.
- Drop-on material mix – according to the relevant BASt test certificate.
Material consumption
Triflex Line Cold Plastic, density approx. 1.9 g/cm³
| Closed-finish line marking | Required volume approx. 4.50 kg/m² with a layer thickness of 2.5 mm. |
| Agglomerate marking | Volume: approx. 2.20 kg/m². |
| Profiled marking | Required volume approx. 6.50 kg/m² with a layer thickness of 3 - 5 mm. |
Calculation formula: line width (m) x line length (m) x volume (kg/m²) = volume required for area (kg)
Triflex Line Cold Plastic meets the requirements of the ZTV M13 (Additional Technical Specifications in Construction Contracts).
Colours
- 9016 White
- Other colours on request.
