Triflex Crack Dressing: Quick partial refurbishment for low budgets
In addition to mechanical loads as a result of multi-storey car park traffic, thermal and dynamic movements also place heavy demands on multi-storey car park structures. The OS 8 surface protection that is mostly used for cost reasons often fails to meet these demands on a long-term basis. This results in the formation of cracks. The ingress of moisture and de-icing salts can then lead to corrosion, which can endanger the structural stability of the building over the long-term.
The Triflex Crack Dressing system is a cost-effective alternative to the full-surface refurbishment of damaged foundation slabs. The dressing can be applied as a long-lasting solution with surface-level mounting and filled stop cuts, or alternatively as a surface construction, in both cases with an abrasion-resistant wearing layer. The fleece-reinforced waterproofing system is also suitable for use as a temporary solution for the quick repair of the structure. Refurbished surfaces can be driven on again after just a few hours.
The partial waterproofing system Triflex Crack Dressing has a General Building Supervisory Authority Test Certificate (abP) and is classified to OS 10 of the Repair Guideline (RiLi-SIB).
System build-up Triflex Crack Dressing, variation 1
Primer (variation 1)
Triflex Cryl Primer 222
Triflex Cryl Primer 222 is used as a primer on asphalt for Triflex systems with a PMMA resin base.
Triflex Metal Primer
Triflex Metal Primer is used as a primer on various metals and rusty substrates.
Triflex Cryl Primer 287
Triflex Cryl Primer 287 is used as a primer on absorbent substrates such as concrete, screed or wood for Triflex systems with a PMMA resin base.
Triflex Pox Primer 116+
Triflex Pox Primer 116+ is used as a primer, a filling primer and a roughness depth levelling material, primarily in the Triflex CPS-F system.
Waterproofing (variation 1)
Triflex Special Fleece
Triflex Special Fleece is used for reinforcement and layer thickness control with Triflex PMMA and PUR systems.
Triflex ProPark
Triflex ProPark is used in the systems Triflex ProPark und Triflex AWS. It is a high-quality and durable fleece-reinforced surface waterproofing product for use in both new buildings and refurbishments.
Wearing layer (variation 1)
Triflex Cryl M 264
Triflex Cryl M 264 is used in the Triflex ProPark and Triflex DeckFloor systems as a non-slip coating in ramp and entrance areas on parking decks subject to extremely heavy mechanical loads.
Other/optional system components (variation 1)
Triflex Cryl RS 240
Triflex Cryl RS 240 is a fast-curing, heavy-duty repair mortar for repairs to screeds and improvement work in exterior areas for thicknesses of 5 mm to 50 mm.
Triflex Cryl Paste
Triflex Cryl Paste is used to level out any unevenness in the substrate and any fleece overlaps or depressions in Triflex systems.
Triflex Cryl RS 242
Triflex Cryl RS 242 is used for repairing and levelling work on asphalt coverings with layer thicknesses of 5 to 50 mm.
Triflex DeckFloor
Triflex DeckFloor is used as a high-quality, durable coating for heavy-duty surfaces in the parking deck systems Triflex ProPark and Triflex DeckFloor. Triflex DeckFloor can also be used to produce scratch and levelling coats in multi-storey car parks.
Triflex Cleaner
Triflex Cleaner is used with all Triflex PMMA, EP, PU and PUA products. It is used to pre-treat substrates and to degrease metal when overcoating or if work is interrupted. In addition, soiled tools can be cleaned with Triflex Cleaner.
Triflex Liquid Thixo
Triflex Liquid Thixo is used as a thickening agent in Triflex PMMA products to allow the coating of vertical surfaces. It is not suitable for EP or PUR products.
Triflex UltraCleaner
Triflex UltraCleaner is used as a universal cleaning and degreasing agent for treating Triflex surfaces.
System build-up Triflex Crack Dressing, variation 2
Primer (variation 2)
Triflex Cryl Primer 222
Triflex Cryl Primer 222 is used as a primer on asphalt for Triflex systems with a PMMA resin base.
Triflex Metal Primer
Triflex Metal Primer is used as a primer on various metals and rusty substrates.
Triflex Cryl Primer 287
Triflex Cryl Primer 287 is used as a primer on absorbent substrates such as concrete, screed or wood for Triflex systems with a PMMA resin base.
Triflex Pox Primer 116+
Triflex Pox Primer 116+ is used as a primer, a filling primer and a roughness depth levelling material, primarily in the Triflex CPS-F system.
Waterproofing (variation 2)
Triflex Special Fleece
Triflex Special Fleece is used for reinforcement and layer thickness control with Triflex PMMA and PUR systems.
Triflex ProPark
Triflex ProPark is used in the systems Triflex ProPark und Triflex AWS. It is a high-quality and durable fleece-reinforced surface waterproofing product for use in both new buildings and refurbishments.
Wearing layer (variation 2)
Triflex Cryl M 264
Triflex Cryl M 264 is used in the Triflex ProPark and Triflex DeckFloor systems as a non-slip coating in ramp and entrance areas on parking decks subject to extremely heavy mechanical loads.
Other/optional system components (variation 2)
Triflex Cryl RS 240
Triflex Cryl RS 240 is a fast-curing, heavy-duty repair mortar for repairs to screeds and improvement work in exterior areas for thicknesses of 5 mm to 50 mm.
Triflex Cryl Paste
Triflex Cryl Paste is used to level out any unevenness in the substrate and any fleece overlaps or depressions in Triflex systems.
Triflex Cryl RS 242
Triflex Cryl RS 242 is used for repairing and levelling work on asphalt coverings with layer thicknesses of 5 to 50 mm.
Triflex DeckFloor
Triflex DeckFloor is used as a high-quality, durable coating for heavy-duty surfaces in the parking deck systems Triflex ProPark and Triflex DeckFloor. Triflex DeckFloor can also be used to produce scratch and levelling coats in multi-storey car parks.
Triflex Cleaner
Triflex Cleaner is used with all Triflex PMMA, EP, PU and PUA products. It is used to pre-treat substrates and to degrease metal when overcoating or if work is interrupted. In addition, soiled tools can be cleaned with Triflex Cleaner.
Triflex Liquid Thixo
Triflex Liquid Thixo is used as a thickening agent in Triflex PMMA products to allow the coating of vertical surfaces. It is not suitable for EP or PUR products.
Triflex UltraCleaner
Triflex UltraCleaner is used as a universal cleaning and degreasing agent for treating Triflex surfaces.
System build-up Triflex Crack Dressing, variation 3
Waterproofing (variation 3)
Triflex Special Fleece
Triflex Special Fleece is used for reinforcement and layer thickness control with Triflex PMMA and PUR systems.
Triflex ProPark
Triflex ProPark is used in the systems Triflex ProPark und Triflex AWS. It is a high-quality and durable fleece-reinforced surface waterproofing product for use in both new buildings and refurbishments.
Other/optional system components (variation 3)
Triflex Cryl RS 240
Triflex Cryl RS 240 is a fast-curing, heavy-duty repair mortar for repairs to screeds and improvement work in exterior areas for thicknesses of 5 mm to 50 mm.
Triflex Cryl Paste
Triflex Cryl Paste is used to level out any unevenness in the substrate and any fleece overlaps or depressions in Triflex systems.
Triflex Cryl RS 242
Triflex Cryl RS 242 is used for repairing and levelling work on asphalt coverings with layer thicknesses of 5 to 50 mm.
Triflex DeckFloor
Triflex DeckFloor is used as a high-quality, durable coating for heavy-duty surfaces in the parking deck systems Triflex ProPark and Triflex DeckFloor. Triflex DeckFloor can also be used to produce scratch and levelling coats in multi-storey car parks.
Triflex Cleaner
Triflex Cleaner is used with all Triflex PMMA, EP, PU and PUA products. It is used to pre-treat substrates and to degrease metal when overcoating or if work is interrupted. In addition, soiled tools can be cleaned with Triflex Cleaner.
Triflex Liquid Thixo
Triflex Liquid Thixo is used as a thickening agent in Triflex PMMA products to allow the coating of vertical surfaces. It is not suitable for EP or PUR products.
Triflex UltraCleaner
Triflex UltraCleaner is used as a universal cleaning and degreasing agent for treating Triflex surfaces.
Specifications & System drawings
Application steps
Exceptional quality. Exceptional conformity.
Triflex products give you complete peace of mind whatever the application. We regard continuous internal and external quality controls in production and extensive field tests prior to market launch as essential.