Telekom’s underground car park.
The refurbishment of the Telekom multi-storey car park in Traunstein presented the local planning office Haumann + Fuchs Ingenieure AG with various challenges. The client and planner demanded an overall concept with coatings from a single source in order to rise to these challenges. After a project-specific consultation by Triflex, the parties involved in the construction decided on three different solutions from the liquid applied waterproofing manufacturer. On the ramps, the top deck waterproofing system Triflex ProPark version 2 shows its strengths with its high mechanical load-bearing capacity. The dynamic crack-bridging parking deck coating system Triflex ProDeck provides an even force distribution on the upper decks with its special reinforcement Triflex ProMesh. With the underground car park Triflex CPS-C+ coating system, the refurbishment experts have produced a surface protection for the lowest parking area, securing the parking garage’s future for many years.
Refurbishment requirements
- Reliable structural protection against moisture and chloride ingress
- Anti-slip, wear-resistant coating
- Avoidance of cracking
- Easy to maintain
- Visual enhancement with new colour and lighting concept
- Compatible system solutions from a single manufacturer
Refurbishment steps overview
Triflex ProPark (version 2)
- Priming of surface and details with Triflex Cryl Primer 287
- Sealing all details with Triflex ProDetail and Triflex Special Fleece
- Sealing the surface with Triflex ProPark
- Producing the highly abrasion-resistant wearing layer using Triflex Cryl M 264: e.g. for standing-out features such as kerbs, pedestrian crossings and barrier islands in signal yellow
Triflex ProDeck
- Priming of surface and details with Triflex Cryl Primer 287
- Sealing all details with Triflex ProDetail and Triflex Special Fleece
- Laying out the reinforcement Triflex ProMesh on the surface and impregnating with Triflex Cryl Primer 287
- Coating of the surface with Triflex ProDeck
- Fine dressing hard grain into the fresh coating and removal of excess after setting
- Sealing the surface with Triflex Cryl Finish 209 (in part with a special colour)
Triflex CPS-C+
- Priming of surface and details with Triflex Pox Primer 116+
- Waterproofing connections, details and joints with Triflex Than R 557 thix
- Applying the priming filler of Triflex Pox Primer 116+ filled with quartz sand and dressed with excess quartz sand in fresh condition
- Sealing the surface with Triflex Pox Finish 173+
TRIFLEX PROVED TO BE THE RIGHT CHOICE FOR THE VARIOUS CHALLENGES, SINCE ALL SYSTEMS ARE COMPATIBLE.
Strabag Property and Facility Services GmbH, Rosenheim
