Field report: Filter Factory WIX-FILTRON Gostyń, Wielkopolska (PL)

En savoir plus

Key facts: Prevention of moisture damage

Lieu
Gostyń, Wielkopolska (PL)
Période des travaux
2013
Taille
approx. 200 running metres of inner gutters
Applicateur
PHU DEKPO

Filter Factory WIX-FILTRON Gostyń, Wielkopolska (PL)

WIX-FILTRON is known throughout Europe as a filter factory for cars and is based in Gostyń. Leaking gutters on one of the steel roofs of the factory was compromising production, as water ingress was sure to cause moisture damage. Due to
an extension of the building by two further halls, drainage channels, which used to be located at the edge of the roof, are now located on the inside of the roof surface at the intersection of various metallic roof surfaces. To ensure the long-term waterproofing of the roof, these gutters measuring approx. 200 running metres were permanently waterproofed with liquid applied waterproofing Triflex ProDetail.

Refurbishment requirements

  • Lasting protection
  • Fast implementation
  • Tested safety
  • Waterproofing of complex shapes
  • Execution irrespective of the weather
  • Adhesion to metal

Refurbishment steps overview

  1. Assembly of new galvanised sheet metal for gutters
  2. Cleaning and abrading the hall roof
  3. Applying a metal primer
  4. Masking the joints of the sheet metal or overlapping with stone duct tape
  5. Laying a PVC foil for decoupling movement joints
  6. Application of Triflex ProDetail

More references

Thumbnail
Toit plat d'un bâtiment commercial, Duisbourg (Allemagne)
Thumbnail
Toiture de la gare, Granville
Thumbnail
Centrale thermique, Hamm (Allemagne)
Toiture d'un centre commercial, Montpellier
Toiture d'un centre commercial, Montpellier
Création d‘une toiture réflective pour une école
Création d‘une toiture réflective, Seichamps