Field report: Vattenfall turbine building in Berlin

Mehr erfahren

Key facts: Refurbishment of bituminous roof

Ort
Berlin-Charlottenburg
Fertigstellung
2007
Area
3,300 m² and 1,500 m of running connections
Ausführung
Palluth Dachbau GmbH, Berlin

Vattenfall Machine Hall Berlin-Charlottenburg

Safely leashed at a lofty height with a great view of the Spree: this formed the setting for the successful roof refurbishment of one of the Vattenfall Group’s disused machine hall in Berlin’s Charlottenburg district. The barrel-shaped roof of the building built around the turn of the century was in urgent need of refurbishment. The bituminous surface required a new seal. The hollow tile ceiling construction,
to which mechanical anchors could not be attached, as well as several bitumen sheets glued on top of each other posed a special challenge here. The power company Vattenfall commissioned Palluth Dachbau GmbH from Berlin to carry out the refurbishment work on this listed building. After numerous trials with various technical processes, Vattenfall, in cooperation with the planner Ewald Rohde, finally decided in April 2007 that they could circumvent the mechanical anchoring problem using the system solution Triflex ProTect in conjunction with

Triflex ProDetail for the vertical surfaces and junctions.
 

Refurbishment requirements

  • Fast and safe application even with complicated connections and surfaces with a large sloping angle
  • Protection of the building fabric even after years of exposure to weather influences
  • Avoiding mechanical anchoring
  • Reduction of the thermal load by choosing light-coloured material

Refurbishment steps overview

  1. Removal of old bitumen sheets and primers
  2. Closing the holes and filling the cracks in the hollow tile ceiling with Triflex Cryl Paste
  3. Priming with Triflex Cryl Primer 222
  4. Detail waterproofing of all connections at strip lighting, corners and parapets with Triflex ProDetail, fleece-reinforced
  5. waterproofing of vertical surfaces with Triflex ProTect and Triflex ProDetail, factory-fitted with adjusting agent, fleece-reinforced
  6. application on the surface Triflex ProTect

WE WERE SPECIFICALLY LOOKING FOR A SOLUTION WITH A VERY SHORT CURING TIME. IT WAS ESSENTIAL TO PREVENT ANY WATER AT ALL FROM GETTING INTO THE MACHINE HALL. THE TRIFLEX MATERIAL IS PARTICULARLY SUITABLE FOR SUCH DIFFICULT REQUIREMENTS AND CAN BE APPLIED QUICKLY AND RELIABLY EVEN WITH COMPLICATED CONNECTIONS.

Christian Palluth, co-owner and managing director of Palluth Dachbau GmbH

More references

Thumbnail
Einbaurinnen Flachdach eines Einfamilienhauses
Thumbnail
Glasdachsanierung Bürogebäude Taborstraße Wien
Thumbnail
Flachdach eines Bäckereibetriebs mit Wohnhaus
Thumbnail
Dachsanierung des Donauturms in Wien
Thumbnail
Wetterradarstation Patscherkofel
Thumbnail
Bürodach Heumühlgasse in Wien
Thumbnail
Kuppeldach Aussichtsturm Irrsdorf
Thumbnail
Kuppelabdichtung Universitätssternwarte in Wien
Thumbnail
Ökopark Hartberg